Deleted
Deleted Member
Posts: 0
|
Post by Deleted on Jul 2, 2017 20:34:04 GMT
Bay window with a quarter light in the rear side, how does it fit in? and how do I get it out. Can I get the quarrel light out without disturbing the main part of the window?
The quarter light itself is seized and we're heading off to France and wanted to give some ventilation in the back.
|
|
|
|
Post by popegregoryxi on Jul 2, 2017 20:49:33 GMT
Pretty sure you have to take the main bit out first bud, that's how I do it anyway.
|
|
|
|
Post by rickyrooo1 on Jul 2, 2017 20:56:17 GMT
Yeah when I did mine I had to remove the 3/4 1st
|
|
|
|
Post by sANDYbAY on Jul 2, 2017 20:57:11 GMT
Hammer.
|
|
|
|
Post by popegregoryxi on Jul 2, 2017 21:11:36 GMT
Does the catch move? if that opens, can you get some plus gas or similar on the pivot points, and give it some gentle welly to free it off in situ?
Edit... They often rot out on the bottom bar of the frame, so lift the rubber and check before going too mad.. they are prone to falling apart if you are not careful.
|
|
