|
|
Post by barryhaynes on Nov 8, 2016 19:38:14 GMT
I've frozen my bollocks off changing the rocker cover gaskets for the second time in a month and the same side is still leaking, should I change the rocker cover, it looks ok but I don't know what else to do
|
|
|
|
Post by Morkc68 on Nov 8, 2016 19:42:25 GMT
Have you tried a smear of grease on the Barry, that works for us.
As you say, is the rocker cover sealing correctly I wonder?
|
|
|
|
Post by rickyrooo1 on Nov 8, 2016 20:06:15 GMT
Genuine or empi crap? You tried bending the bales to put a bit of spring in
|
|
|
|
Post by ozziedog on Nov 8, 2016 20:15:42 GMT
Or spend some dosh on them super duper silicone ones, as they got a bit more flex in em.
Ozziedog,,,,,,,,,,,,,,,, Keep meaning to do mine too he he he
|
|
|
|
Post by gooner on Nov 8, 2016 20:40:00 GMT
Bazaa I may have a new set in my garage for type 1? They any good to you?
Hi Ozzie 🙋
|
|
|
|
Post by barryhaynes on Nov 8, 2016 20:51:51 GMT
Bazaa I may have a new set in my garage for type 1? They any good to you? Hi Ozzie 🙋 It's a T4 2-0 ltr, but thanks anyway,I'm going to try Ricks suggestion , I'm going to bend the iron clip on that side and maybe try some sealant, if that fails a new cover, or could it be the head, |
|
|
|
Post by Baz on Nov 8, 2016 20:52:45 GMT
Take the cover off have a look in the corners is the steel dead flat ? some of the new ones have a wrinkled corner and are a bugger to seal. As said good quality cork (soft cork that is ) are best not them with black specs /neoprene . the softer the better id say and nice tight bale arms .  |
|
|
|
Post by gooner on Nov 8, 2016 20:52:46 GMT
👍
|
|
|
|
Post by gooner on Nov 8, 2016 20:53:07 GMT
👍
|
|
|
|
Post by rickyrooo1 on Nov 8, 2016 20:57:36 GMT
Don't use sealant.
|
|
|
|
Post by Baz on Nov 8, 2016 21:02:58 GMT
mores the point get ya bollocks fixed first
|
|
|
|
Post by barryhaynes on Nov 9, 2016 20:48:15 GMT
mores the point get ya bollocks fixed first Bollocks fixed |
|
