don
New Member
Posts: 18
|
.
Jun 2, 2018 8:39:21 GMT
Post by don on Jun 2, 2018 8:39:21 GMT
.
|
|
don
New Member
Posts: 18
|
.
Jun 9, 2018 7:33:02 GMT
Post by don on Jun 9, 2018 7:33:02 GMT
.
|
|
|
.
Jun 11, 2018 13:46:53 GMT
Post by chad on Jun 11, 2018 13:46:53 GMT
Sorry no - with a 1641cc Single Port I'd never use top gear and I don't fancy a 3 speed gearbox
|
|
don
New Member
Posts: 18
|
.
Jun 11, 2018 19:50:19 GMT
Post by don on Jun 11, 2018 19:50:19 GMT
.
|
|
|
.
Jun 12, 2018 4:56:47 GMT
Post by chad on Jun 12, 2018 4:56:47 GMT
It's be overkill paying for a six rib when a cheaper standard one works fine
|
|
|
.
Jun 21, 2018 8:24:31 GMT
Post by Robo on Jun 21, 2018 8:24:31 GMT
So its that time of the year when I'll pull another rabbit out of the hat.This time once more the lucky buyer will be able to spec the gearbox to his liking - so above the standard 6 rib spec you can have different gear ratios, thrust plate, oiling plates, uprated 3/4 hub list goes on, everything can be discussed. Someone was asking questions about a 6 rib on facebook the otherday & they mentioned that it was from TLB so you may have an interest.
|
|
don
New Member
Posts: 18
|
.
Jun 25, 2018 9:08:04 GMT
Post by don on Jun 25, 2018 9:08:04 GMT
.
|
|
|
.
Jun 25, 2018 9:38:49 GMT
Post by Robo on Jun 25, 2018 9:38:49 GMT
Someone was asking questions about a 6 rib on facebook the otherday & they mentioned that it was from TLB so you may have an interest. What did they ask? got link? It was a question asking if they'd see in improvement over their current gearbox, it was then another comment from someone asking if it was the 6 Rib on thelatebay that he was considering & he replied yes. Sorry no links & I'm way too tired to go looking for it but it was on the unofficial latebay facebook group if that helps.
|
|
don
New Member
Posts: 18
|
.
Jun 25, 2018 10:29:03 GMT
Post by don on Jun 25, 2018 10:29:03 GMT
.
|
|
|
.
Jun 25, 2018 11:11:21 GMT
Post by Robo on Jun 25, 2018 11:11:21 GMT
|
|
don
New Member
Posts: 18
|
.
Jun 26, 2018 7:26:15 GMT
Post by don on Jun 26, 2018 7:26:15 GMT
.
|
|