|
Post by womball on Jul 11, 2017 15:21:14 GMT
Right t2 1.6 dynamo whey i turn the ignition on the relay does one click then when driving it ticks every twenty seconds but idecaters work fine and hazard work fine so really annoying please help really puts me of driving her
|
|
|
Post by rickyrooo1 on Jul 11, 2017 15:42:10 GMT
Is it deffo the indicator relay? You've checked by listening/touching while indicators are on? Check all connections are clean and tight
|
|
|
Post by popegregoryxi on Jul 11, 2017 15:43:34 GMT
I had this recently. New relay fixed it. 👍
|
|
|
Post by womball on Jul 11, 2017 15:47:27 GMT
cheers for that ok il try a new relay and let you know
|
|
|
Post by Zed on Jul 12, 2017 7:06:55 GMT
cheers for that ok il try a new relay and let you know Does it tick in time with your waving petrol gauge?
|
|
|
Post by womball on Jul 12, 2017 13:19:03 GMT
cheers for that ok il try a new relay and let you know Does it tick in time with your waving petrol gauge? no not really
|
|
|
Post by Baz on Jul 12, 2017 15:06:37 GMT
What rick says ,? Is it def indicator relay.? ,are all connections clean etc on starter etc .
|
|
|
Post by womball on Jul 12, 2017 16:44:43 GMT
What rick says ,? Is it def indicator relay.? ,are all connections clean etc on starter etc . yep all clean and new.Plus relay was new when built all connections checked and cleaned.I think il change relay and see dont know what else to do
|
|
|
Post by Baz on Jul 12, 2017 16:56:34 GMT
What rick says ,? Is it def indicator relay.? ,are all connections clean etc on starter etc . yep all clean and new.Plus relay was new when built all connections checked and cleaned.I think il change relay and see dont know what else to do You could try squirting some contact cleaner in on stalk contacts ,then squirt compressed air in and allow to dry ,if theirs crap on the stork cons it can do this MAYBe ??
|
|
|
Post by Baz on Jul 12, 2017 17:01:55 GMT
Wd 40 do a good dry electrical contact spray , has worked miricals for me on ,my maas elec tric mower n othe electric fings
|
|
|
Post by Baz on Jul 12, 2017 17:05:24 GMT
Ps don't use ordinary wd40 as this will cook your contacts!! ,!👍
|
|
|
Post by womball on Jul 23, 2017 18:40:57 GMT
well i changed the relay and just the same ticking.then used switch cleaner on the indecater switch still the same checked all the wiring cleaned all the connections and still ticking.really starting to piss me of whats next to check please help
|
|
|
Post by Baz on Jul 23, 2017 18:51:14 GMT
Bludyell , I'd get a new watch bud ?
|
|
|
Post by Baz on Jul 23, 2017 19:15:56 GMT
Sorry bud dunno. Your sure it's indicator thou ?
|
|
|
Post by Zed on Jul 23, 2017 19:35:42 GMT
I'm vaguely aware of the circuit. Power through relay to switch through bulb to earth. So if the lights aren't flashing, must be wire between relay and switch earthing or problem within (or connection to) the switch earthing.
|
|