|
|
Post by chad on Jul 11, 2017 8:46:09 GMT
I've just been sorting out part of my garage and there is a 'spare' tailgate in there.
When I bought it quite a few years ago I was told that it was for an early.
I believed the guy but on reflection I think that he knew even less than me about T2s.
How can I tell ?
|
|
|
|
Post by Woody on Jul 11, 2017 9:11:01 GMT
It'll look cooler than a late 😀
|
|
|
|
Post by Zed on Jul 11, 2017 9:14:13 GMT
The holes for the hinge fixings are spaced further apart (I think) and slightly different place on later hatches. I had a picture on photobucket...
|
|
|
|
Post by popegregoryxi on Jul 11, 2017 10:01:38 GMT
If it's any help, early bolt holes are 60mm apart. Ish.
|
|
|
|
Post by Zed on Jul 11, 2017 10:39:53 GMT
I'm in my van cleaning the carbs, a late is from the left hand side of the R on a Rizla packet to the right hand side.
|
|
|
|
Post by popegregoryxi on Jul 11, 2017 11:08:51 GMT
Is that king size or regular Rizla though?
|
|
|
|
Post by Zed on Jul 11, 2017 11:25:37 GMT
Is that king size or regular Rizla though? Regular. |
|
|
|
Post by chad on Jul 11, 2017 11:49:26 GMT
Why are there never any Rizla packets around when you need them?
|
|
|
|
Post by Zed on Jul 11, 2017 11:54:29 GMT
Why are there never any Rizla packets around when you need them? I've got one.  |
|
|
|
Post by chad on Jul 11, 2017 12:04:02 GMT
Not much use to me here. Maybe one day someone will come up with an alternative way of measuring things for when Rizla packets are extinct. |
|
|
|
Post by Zed on Jul 11, 2017 12:37:33 GMT
Not much use to me here. Maybe one day someone will come up with an alternative way of measuring things for when Rizla packets are extinct. It's about 60mm. Perhaps the position is the difference then. |
|
|
|
Post by chad on Jul 11, 2017 13:24:28 GMT
Thanks guys.
The hinge holes are 60mm apart.
The lock holes are 95mm apart which, if the C&C website is to be trusted, means it's 72 onwards.
Does this make sense to you?
|
|
|
|
Post by Zed on Jul 11, 2017 14:10:48 GMT
Thanks guys. The hinge holes are 60mm apart. The lock holes are 95mm apart which, if the C&C website is to be trusted, means it's 72 onwards. Does this make sense to you? post a pic of the hatch hinge holes and I'll do same. They are in a different place, a good inch different. |
|
|
|
Post by Zed on Jul 11, 2017 14:30:02 GMT
|
|
|
|
Post by chad on Jul 11, 2017 14:31:28 GMT
 url=https://postimage.org]  [/url] |
|
